Though both the crushers belong to the compression type of crushers, the reduction ratio of the cone crusher is higher than that of the jaw crusher due to its higher crushing forces. The processing capacity of the cone crusher is also higher than that of the jaw crusher.

Single toggle jaw crushers are better than double toggle crushers because the motion in a double toggle is strictly linear. The swing jaw moves forward and away from the fixed jaw in a linear basis like a door is opened and closed whereas in a single toggle, the swing jaw is fixed to an eccentric shaft and tow types of motion are possible. One is the linear opening and closing of the swing jaw and up and down motion of the eccentric. Consequently, the throughput capacity of the single toggle is higher than that of a double toggle.

The important parameters needed to select the size of the jaw crushers are

1. The F80 ( 80% passing) size of the feed
material or the maximum feed size.

2. The P80 (80% passing) size of the output material.

3. The gape of the Jaw Crusher ( Length X Width ) of the opening.

4. The Throughput of the Jaw Crusher in Metric Tons Per hour (mtph)

5. Available space and electricity.

Nesans CH Series Jaw Crushers come with an option of shim adjustment and hydraulic wedge adjustment. The shims can be added or removed as per the output size requirement. If the setting is done once in six months or once in a year, then hydraulic wedge adjustment is not required. Hydraulic adjustments come handy when the setting is altered frequently.

Jaw Crushers are either oil lubricated or grease lubricated. Nesans CH Series are grease lubricated jaw crushers. The main advantage of grease lubricated crushers are their ease of maintenance. Contamination of oil may lead to severe catastrophic failure of the crusher shaft and bearings that may prove very costly to the customer.